Why is the indicator light still on after replacing the filter?
This is a common problem, we will feel whether this means that there is a problem with the refrigerator water filter. But in fact, the possibility of failure of the water filter is very small. On the contrary, the most common reason may be that the replacement lamp needs to be reset. Usually, this light is a timer to remind you to change the filter every 3 to 6 months. However, some replacement filter lights measure the water flow and recommend replacement of the filter.
So, how to reset the refrigerator to replace the filter lights?
Step 2: After installing the filter, you must tell the refrigerator that there is a new filter. Remember, this is a reminder light (similar to a 6-month timer) telling you that it is time to replace the filter. Some refrigerators change the light according to the time, while others change the light according to the water flow.
Green: This means the filter is new and does not need to be replaced
Yellow: This indicates that the life expectancy of the filter is over half
Red: Indicates that the filter needs to be replaced.
If the indicator light is red, it means your refrigerator filter needs to be replaced
The following are guidelines for replacing filters for certain refrigerator brands:
Amana-Press and hold the "Auto" and "Dispenser Lock" buttons (there may be a padlock) until the water filter status indicator flashes.
LG-Press and hold the "Filter" button or the "Reset" button for about 5 seconds.
-Quickly press and release the "Light" button 5 to 6 times. This is the button to turn on the light in the refrigerator. It is usually located at the top or bottom of the closed door.
Press and hold the "Reset" button. The indicator light will flash and then reset.
GE-Press and hold the "Reset" button for approximately 8 to 10 seconds.
Jenn-Air-Press and hold the "Light" and "Lock" buttons until the filter indicator flashes (maximum 10 seconds allowed).
KitchenAid-Press and release the "Light" button 5 times.
Maytag-Press and hold the "Light" and "Lock" buttons until the filter indicator flashes for approximately 8 to 10 seconds).
Samsung-Press and hold the "Ice Type (Cubed or Crushed)" and "Child Lock" buttons at the same time for about 3 to 5 seconds.
The refrigerator filters produced by Morefilter can be compatible with many brands of refrigerators. If your 9030 water filter needs to be replaced, and you are looking for an affordable alternative filter, here you can find a filter suitable for your refrigerator, our The filter quality is guaranteed, and there is one-stop after-sales service.
